SOLIO in action.
Three examples from practice – from a rapid-charging park and a large site with battery storage to our own pilot home. We show the customer projects without names.
Nine charging points, one grid connection.
A business operates three rapid chargers in the 150 kW class. Each charger has two DC charging points and one AC charging point with 22 kW – nine charging points in total on a shared grid connection with limited capacity. Even so, every vehicle should charge as fast as possible.
Implemented with SOLIO
- Direct connection of all chargers via Modbus/TCP
- Power is continuously distributed across all charging points – if two vehicles charge at one charger, they share its power
- The shared power limit of 250 kW at the grid connection is always respected
- Fail-safe operation: without a connection, each charger automatically falls back to a safe power level
- Charging power, energy and status of every charging point live in the portal
Rapid chargers
Charging points
per charger
shared power limit
15 inverters, one large battery, one system.
A site with several residential and work buildings generates solar power via 15 inverters from two manufacturers and of different ages – some of them without a Modbus interface. On top of that there is a three-phase battery system with 72 kW and around 186 kWh. The goal was a single control system with a backup reserve and an eye on electricity prices.
Implemented with SOLIO
- All 15 PV inverters integrated directly – older devices without Modbus via their own interface
- Victron battery system connected, including its battery management
- Backup reserve that the operator sets in the portal
- Wholesale electricity prices are factored into discharge planning
- Additional metering points in individual buildings via Shelly meters
PV inverters
Battery inverter
Storage capacity
Our test bed: everything SOLIO can control.
In our pilot system, a single-family home, every new SOLIO feature runs in everyday use first, before it reaches our customers. That is why almost every kind of energy technology a household can have is in use here.
Implemented with SOLIO
- Three batteries from different manufacturers combined into one storage cluster – with a backup reserve
- PV on the main roof, partly with module optimisers, plus five microinverters
- EV charger with an electric car: charging on PV surplus and to a schedule
- Heat pump via SG Ready and an immersion heater that reaches the desired temperature by a set time
- A Bitcoin miner as a flexible load that follows the forecast and surplus power
- Self-learning forecast for generation and consumption
- Ventilation, dehumidifier and garage doors via relays and smart plugs
Batteries in one cluster
connected devices
forecast ahead
Is your project next?
Send us what you have – we will check free of charge which apps you need and what SOLIO can make of it.